Microcement Showers
Approved Installers of Microcement for Shower
At GreenCork Ltd, we install seamless microcement shower coatings across Leeds and West Yorkshire, creating waterproof shower walls without grout lines, silicone joints or visible tile edges, often directly over existing tiles.
What Is a Microcement Shower?
Seamless Waterproof Shower Coatings Without Grout Lines
At GreenCork Ltd, we install seamless microcement shower coatings across Leeds and West Yorkshire using fully waterproof decorative concrete systems designed for permanent water contact.
A microcement shower creates one continuous sealed surface across shower walls, niches and surrounding wet areas with no grout lines, silicone joints or visible tile edges. The coating is typically applied at a total thickness of around 2 to 3 mm and, in many cases, can be installed directly over existing shower tiles with minimal disruption.
Our shower systems are built up in multiple layers including primer, fibreglass reinforcement mesh, base coats, finishing coats and a water-based bi-component polyurethane varnish that seals and protects the finished surface.
0113 519 8733
Tiled Showers vs Microcement Shower Coatings
Traditional tiled showers rely on grout joints, silicone seals and multiple material junctions across walls, niches and tray edges. In daily shower use, these become the areas most likely to collect mould, discolour or require maintenance over time.
Microcement shower coatings replace tiled surfaces with one continuous waterproof finish across the enclosure, reducing joints, edges and maintenance points throughout the shower area.
- Grout lines across shower walls absorb moisture and gradually discolour.
- Silicone seals at corners, tray edges and niches require periodic replacement.
- Shower shelves and recessed niches introduce additional grout joints and sealant lines.
- Retiling often involves removing existing tiles and repairing the substrate underneath.
- Seamless waterproof coating with no grout lines or visible tile edges.
- Continuous shower wall finish around corners, niches and fittings.
- Typically applied at only 2 to 3 mm thickness, often directly over existing tiles.
- No regrouting cycle or separate perimeter seals across the main shower surfaces.
Where Microcement Can Be Applied in a Shower
One of the practical advantages of microcement walls is that they can often be applied directly over existing surfaces without full wall removal or major rebuilding work. Below is a guide to suitable wall substrates and the preparation required before installation.
Shower Walls
Microcement creates seamless waterproof shower walls with no grout joints, silicone corner joints or tiled wall transitions.
Shower Floors
Tray-free shower floors must be correctly sloped towards the drain before installation and finished with the appropriate anti-slip specification.
Shower Niches & Shelving
Recessed shower niches and shelving can be coated continuously with the surrounding shower walls without trims or grout lines.
Shower Ceilings
Microcement can also be applied across shower ceilings to create a more continuous waterproof shower finish without painted ceiling surfaces.
Around Shower Fittings
Microcement finishes cleanly around shower valves, shower heads and controls with minimal visible sealing around fixture points.
Shower & Bathroom Transitions
Microcement can continue seamlessly from the shower area into the surrounding bathroom floor and wall surfaces for a more cohesive finish.
Choosing the Right Waterproof Microcement Finish for Your Shower
At GreenCork Ltd, we install fully waterproof microcement shower coatings across shower walls, niches and tray-free shower areas. Both finishes are designed for permanent water contact but create a different texture and overall concrete-style appearance.
Smooth Waterproof Shower Finish
AQUA QUARTZ Shower Finish
AQUA QUARTZ creates a smoother waterproof shower finish with either soft tonal movement or a more uniform appearance depending on the application technique used.
- Texture — Smooth
- Colour variation — marbled or uniform
- Thickness — From 0.1 mm per coat
- Application — Two coats, single container
- Colours — 20 Available
BEST FOR
Shower walls, tray-free shower floors, shower niches and steam shower enclosures where a seamless waterproof coating is required. Our most widely used finish for microcement shower installations.
Varnish Finish Options
Gloss
Satin
Matt
Raw Concrete Shower Finish
Microconcrete Shower Finish
Microconcrete creates a more textured waterproof shower surface with the raw character and depth associated with natural concrete.
- Texture — Medium-smooth, raw concrete
- Colour variation — Consistent, with natural depth
- Thickness — From 0.5 mm per coat
- Application — Two coats, single container
- Colours — 12 Available
BEST FOR
Shower walls and wet areas where a stronger industrial concrete-style appearance is part of the design and a more textured finish is preferred.
Varnish Finish Options
Gloss
Satin
Matt
Which Type of Shower Can Microcement Be Installed In?
At GreenCork Ltd, we tailor the system specification to suit how each space is used, from waterproof shower walls through to decorative concrete-style feature walls and external facades.
Walk-In Showers
Microcement creates a seamless waterproof finish for walk-in showers and level-access shower floors with no grout lines, tray edges or visible joints.
Shower Enclosures with Trays
Microcement creates continuous waterproof shower walls around acrylic, ceramic and stone resin shower trays with minimal visible sealing.
Over-Bath Showers
Microcement provides a waterproof wall coating above baths and shower zones without grout lines or tiled wall joints.
Corner & Quadrant Showers
Microcement forms seamless internal shower corners without the grout joints and silicone lines commonly found in tiled enclosures.
Steam Showers & Steam Rooms
AQUA QUARTZ microcement creates a fully waterproof sealed finish suitable for steam showers and high-moisture shower environments.
Shower Niches & Recessed Shelving
Microcement creates continuous waterproof shower niches and recessed shelving without grout lines, trims or separate perimeter seals.
If you are unsure whether your existing shower is suitable for microcement, we can assess the surfaces during a free survey and advise on the best options.
Transform Your Shower with Microcement in 3 Simple Steps
At GreenCork Ltd, we install fully waterproof microcement shower coatings across Leeds and West Yorkshire using carefully prepared systems designed for long-term performance in high-moisture environments.
Survey & Surface Preparation
We inspect the existing shower surfaces, check moisture levels, assess tile adhesion and confirm the condition of the substrate before installation begins. Any loose tiles, failed silicone or unstable areas are repaired beforehand.
Waterproof Microcement Installation
Primer and reinforcement mesh are applied where required before the microcement system is built up in multiple thin layers across the shower walls, niches and surrounding wet areas for a seamless finish.
Sealing & Protection
The completed surface is sealed with a water-based bi-component polyurethane varnish in the chosen finish, with anti-slip protection added to tray-free shower floors where required.
Customer Reviews
Proven Results, Backed by Happy Customers
Microcement Shower Installations Across Leeds & West Yorkshire
We install seamless microcement shower coatings across Leeds and West Yorkshire for bathrooms, shower enclosures and wet areas. If your location is not listed below or you are unsure whether we cover your area, call 0113 519 8733 and we will be happy to advise.
Leeds City Centre
Roundhay
Horsforth
Alwoodley
Bradford
Harrogate
Wakefield
Huddersfield
Halifax
Shipley
Bingley
Pudsey
Dewsbury
Pontefract
0113 519 8733
FAQ'S
Frequently Asked Questions
If you are considering a microcement shower, we can assess the existing surfaces during a free survey and provide clear advice with a no obligation quotation.
Speak to a real expert. No call centres.
Send us photos or questions, we’ll reply fast.
Is microcement waterproof enough for a shower?
Yes. AQUA QUARTZ and Microconcrete are fully waterproof throughout the coating, not only at the varnish surface. The sealed finish has no grout lines or internal joints where moisture can collect or penetrate behind the surface.
Is microcement sgower floor slippery?
The water-based polyurethane varnish we use is less slippery when wet than solvent-based alternatives. We add anti-slip microspheres to the shower floor varnish for all shower installations. The quantity determines the certification level — 100g per component achieves C2, 200g achieves C3. We specify C3 as standard for walk-in shower floors and rain head showers where water covers a larger floor area. The specific level for your shower is confirmed in the written quote after the survey.
How do shower fittings and valves work with a microcement shower?
All shower fittings including valves, hand shower holders, riser rails and thermostatic controls are removed before installation and refitted once the microcement is complete. The surface runs cleanly behind each fitting position during application. Once refitted, a small bead of mould-resistant neutral-cure silicone is applied around the fitting perimeter to create a clean waterproof seal.
Can I use normal shower cleaning spray for microcement?
No. Microcement shower surfaces should only be cleaned with pH-neutral products, as bleach, acids and harsh cleaners can damage the polyurethane varnish. Without grout lines, the surface is much easier to keep clean than a tiled shower.
How much does microcement shower installation cost?
Pricing depends on the size of the shower area, the surfaces being coated, the finish selected and the level of preparation required before installation. We provide free site surveys and written quotations for microcement shower installations across Leeds and West Yorkshire. Contact us on 0113 519 8733 to arrange a no obligation visit.
